Luminous text – ARCHLine.XP

You can place a 3D text on a surface

1. Type the text and click OK.

2. Click on a 3D surface.

3. Set the origin of the text.

4. Set the direction of the text.

5. Type the the extrusion depth value.

Main parameters:

Enable light	Activate the 'Enable light' option to turn the luminous text on.
Lighting is enabled on the front only	The light of the luminous text is only applied onto the front surface, the body part of the text does not emit light.
Light intensity per meter	Select from the predefined values or type any value to set dimming of level.
Dimming level	You can specify the value for modifying the dimming level. 100% means that it adjusts the same dimming level as the original dimming level, while providing a different value to reduce or increase the original dimming level. Select from the predefined values or type any value to set dimming level of luminous text.
Light colour	You can choose any colours for the luminous text. Click the button and choose a colour from the displayed colour palette.
Material of light	Three materials can be assigned to the text, the material of the body and the material of the front and back surface. These are visible when the luminous text is turned off.

Verwandte Beiträge