Draw connected segments as a single object called polyline. The lines drawn one after the other form the polyline, and the program treats these sections as a single unit (polyline). Polyline consists of straight line or arc segments.
Command location: Drafting > Polyline
1. Click to set the starting point of the polyline.
2. Place the next point of the polyline.
3.-4. Repeat the 2. step as many times you need.
5. Press enter to finish the polyline.
Note: You can hit the Enter key on the keyboard to finish the command and turn the last breakpoint into the endpoint of the polyline. You can turn a closed path to an open one and vice versa by choosing the rigth click menu Edit - Close command
Comments
0 comments
Article is closed for comments.