Platók

A terepben platók alakíthatók ki.

Commands:

Add - Create Plateau.

1. Adja meg a plató körvonalát a megjelenő Profildefiníciók eszköz segítségével.
2. Adja meg a plató magasságát.
3. Adja meg a rézsű dőlésszögét (a függőlegeshez képest).

A program a plató magasságának megfelelően kivágja a terep szükséges részeit,
ill. kiegészíti, feltölti a hiányzó területeket.

You can obtain information on the earthworks necessary for their creation in the Documentation – Quantity Take-Off -Building calculation dialog box.

Delete - Deleting a plateau
1. Select the terrain.
2. Select the contour of the plateau you want to delete.

The program restores the original terrain by deleting the selected plateau.

Modify plateau contour
Using this command you can modify the contour of the horizontal plateau.

• Select the plateau you wish to modify.
• Modify the contour of the plateau with the commands of the Edit Profile tool displayed in the Toolbox (e.g. move nodes, round off).
• Enter Ends the command.

Modify plateau slope
The command modifies the angle of the slope (relative to vertical) on all side.

• Select the slope the angle of which you want to modify by clicking its contour line.
• Enter the new value of inclination in the dialog box. Ok.

Modify plateau slope one side
The command modifies the angle of the slope (relative to vertical) one by one.

• Select the slope the angle of which you want to modify by clicking its contour line.
• Enter the new value of inclination in the dialog box. Ok.

Modify workplace width

The workplace width indicates the wide band that is to be recharged after the house has been constructed in the plow-built pit.
Enter the width of the work area (lane) that needs to be replenished after being built in from the contour of the platform.

The program calculates the volume to be re-assigned for this purpose.
You can obtain information on the earthworks necessary for their creation in the Documentation – Quantity Take-Off-Building calculation dialog box.
There is no 3D view assigned.

Change plateau material

The command modifies different part of plateau materials.

1. Select the plateau you want to modify.